2019 Sacramento Amateur Mile Sign-Up Page
TECHNICAL INSPECTION REQUIREMENTS
This is an AMA sanctioned event. All motorcycles must adhere to the following AMA and track requirements (Refer to the 2019 AMA racing rule book):
1. Oil drain plugs must be safety wired.
2. Water cooled engines must use just water or a non-glycol based coolant (No antifreeze).
3. Water cooled engines must have a radiator over flow catch container.
4. No lights, license plates, brackets, mirrors, glass or equipment posing a hazard to the rider or other competitors are allowed.
5. Kickstands must be removed.
6. Footrests must fold back at a 45-degree angle and must have a non skid surface.
7. The rear brake must operate properly.
8. The front brake must be inoperable for this event.
9. Levers must have ball ends at least 1/2 inch in diameter.
10. A functional mechanical engine kill device must be installed on the handlebar.
11. A self-closing throttle must be operational.
12. Class C traction tires are required.
13. Exhaust must not exceed AMA sound limits.
This is an AMA sanctioned event. All motorcycles must adhere to the following AMA and track requirements (Refer to the 2019 AMA racing rule book):
1. Oil drain plugs must be safety wired.
2. Water cooled engines must use just water or a non-glycol based coolant (No antifreeze).
3. Water cooled engines must have a radiator over flow catch container.
4. No lights, license plates, brackets, mirrors, glass or equipment posing a hazard to the rider or other competitors are allowed.
5. Kickstands must be removed.
6. Footrests must fold back at a 45-degree angle and must have a non skid surface.
7. The rear brake must operate properly.
8. The front brake must be inoperable for this event.
9. Levers must have ball ends at least 1/2 inch in diameter.
10. A functional mechanical engine kill device must be installed on the handlebar.
11. A self-closing throttle must be operational.
12. Class C traction tires are required.
13. Exhaust must not exceed AMA sound limits.
